Skip to content
Topping Releases New Firmware V1.24 For D90 MQA DAC.

Topping Releases New Firmware V1.24 For D90 MQA DAC.

Topping D90 has swiftly grown into one of the best-selling and highly-coveted MQA decoding DACs on the market today. Its excellent build quality, transcendent sound, and various features have shown it is an amazingly versatile and state of the art DAC.

As with many DACs out there, particularly brand-new ones using AKM's latest AK4499EQ DAC chip, there is always the likelihood of adding minor improvements and fixing little glitches via a firmware update. In the case of the D90 MQA, Topping went ahead and issued firmware update V1.24, which addresses small issues for USB input users, allowing a new bit-depth for MQA users along the way.

It appears that Topping's engineers have been working hard on fixing the few bugs D90 users brought to the surface, and have therefore issued firmware V1.24 for the D90 DAC to address a few issues.

Topping D90 MQA DAC Firmware V1.24 Changelog:

Topping has declared that firmware V1.24 includes the following changes:

This firmware is only for the D90 MQA version. This firmware adds 32bit support to the D90 MQA version at the USB input. If the firmware of your D90 MQA version already V1.24, then you needn't do this update. The standard version of D90 already supports 32bit at USB input, so you needn't do this update either.

Topping D90 MQA Warning:

Please noted that standard version D90 is not able to add MQA support by this firmware; flashing this firmware to the standard version of D90 may cause irreversible damage. So if your D90 is a standard version, please DO NOT try this firmware.

Firmware and tools for Windows: Download here (This update requires a Windows 10 OS with V4.82 drivers installed. V4.82 drivers could be download here).

Firmware and tools for MAC: Download here

If you have questions about the upgrade of your D90 MQA version, please contact us before updating this firmware.

Conclusion

As you can see, the firmware adds 32bit support to the D90 MQA version at the USB input. To install firmware V1.24 onto your Topping D90 MQA DAC, you will first need to download it here. You will additionally need to have the USB DAC driver installed on your PC/MAC, including, of course, the necessary firmware upgrading tool.

Don't hesitate to contact Topping if you have any questions about the upgrade process of your D90 MQA DAC. Follow the instructions carefully, and you should be listening to high-res 32-bit depth music on your D90 MQA DAC in no time.




Previous article Astell & Kern Releases The World's First Multi-DAC DAP
Next article Moondrop SSR To Be Updated On The Basis Of Consumer Reviews

Comments

Carlos Barrera Chavez - July 27, 2020

Hi ! :

I have a question about Topping D90 MQA
Is there an indicator on the screen (display) that indicates when to play an MQA file?
Tank you
Regards . Carlos Barrera Chávez / Stockholm- Sverige

Leave a comment

Comments must be approved before appearing

* Required fields