Go toLog in Go toSign up
Skip to content
Shipping will resume on Oct. 8th for all orders placed from Oct. 1st to Oct. 7th. Customer service will still be available in case you ever need help.
Shipping will resume on Oct. 8th for all orders placed from Oct. 1st to Oct. 7th. Customer service will still be available in case you ever need help.
Hiby W3 Headphone Bluetooth dongle Dac amplifier | Hifigo

Hiby W3 Headphone Bluetooth dongle Dac amplifier | Hifigo

Together with the very first audio music player Hiby R8 with Andriod 9.0 and Hiby R6 pro Music player, Hiby launched their latest headphone BlueTooth dongle Dac amplifier, Hiby W3 on the exhibition held on September 7th-8th,2019 in Guangzhou, which is the biggest audio exhibition in China in 2019 until now.  

Specification of Hiby W3 Bluetooth DAC Amplifier

Volume Adjustment
Independent adjustment separating from cellphone's volume
Supported Audio Formats
AAC, SBC, aptX, aptX Low Latency,aptX HD, LDAC, and LHDC
Bluetooth Chip: CSR8675
AMP/DAC: AK4377
USB DAC: Yes
Transmission Distance: 30m (at open area)
Hands-free call/Mic: Yes
Call up Siri in iOS: Yes
NFC: Yes
Headphone Output: 3.5 mm stereo jack
USB Port: Type C
Battery Capacity:320mAh
Battery Life: About 11.5h
Charging Time:1.5h
Dimensions:58.82*25.6*15.8mm (incl. back clip)
Wearing: Clip + lanyard
Weight: About 19.5g 

 

Main features of Hiby W3 Bluetooth DAC Amplifier

AK4377A DAC

The AK4377A DAC in the W3 ( while AK4376 in Fiio BTR3 ), with its extremely high 118 dB Signal-to-Noise ratio, means that you will be able to catch every last nuance and detail in your music. 

Qualcomm CR8675 Bluetooth 5.0

The Qualcomm CR8675 Bluetooth chip used in the Hiby W3 is a premium low-power solution designed for enhanced audio applications with support for 24-bit transmission and processing. This chip is also much more stable in signal strength than other competing chips, especially in situations with lots of interference. 

The Hiby W3 supports all current wireless audio codecs – such as AAC, SBC, aptX, aptX Low Latency, aptX HD, LDAC, LHDC, and HWA. This robust format support will ensure great sound quality to give your headphones new life, and to allow them to once more to resonate with you emotionally.

Amplifier with cVc tech

The built-in amplifier in the Hiby W3 not only ensures your music sounds good, but that your calls do to. To further enhance your calling experience, Hiby W3 is also equipped with Qualcomm's cVc ( Clear Voice Capture) noise cancellation technology, which automatically adjusts the microphone and actively suppresses background noise so that your call comes through as clear and audible as possible.

The 320 mAh battery in the Hiby W3 takes only 1.5 hours to fully charge but allows for a lengthy 11.5 hours of playback! ( Quoted playback time based on using the AAC codec )

Simple one-touch NFC pairing

The Hiby W3 can be paired to other compatible devices with just a simple tap using the NFC wireless short-range communication protocol, entirely avoiding the cumbersome traditional pairing process.

The Hiby W3 adopts the Type-C connector, which is easier to use than ever with its symmetric connector, allow you to insert a cable either way. USB DAC functionality is now also supported – no drivers needed here, simply plug and play!  

App Control

HiByBlue App control, supporting checking sample rate, Bluetooth format, battery, EQ and firmware upgrade, etc. 

Price and Available of Hiby W3 

Hiby didn't unveil the detail price of Hiby W3 for the international market yet, it might be a range of $49 ~ $59. Shipment is released already in China and it will release soon for oversea market.  

 

Previous article FiiO Introduces FA19 Flagship 10 BA Driver IEMs

Leave a comment

Comments must be approved before appearing

* Required fields