xDuoo MT-604 Balanced Tube Headphone Amplifier
Features:-
>Tube +Transistor Hybrid Amplifier.
>Four 6J1 Tubes for the Pre-amp stage.
>Class-A Transistor Buffer.
>XLR and 4.4mm Balanced Input/Output Options.
>High-performance audio circuitry.
>Independent Left & Right volume channels.
>Built-In Mute Circuit.
>Exquisite Build with Sand-Blasted Textured Panel.
>Gain: +15dB.
>Output Power: 2000mW @ 1kHz, 32ohm.
>Dynamic Range: 85dBA(32ohm).
>Frequency Response Range: 10Hz-60kHz.
>Supported Headphone Impedance: 16ohm-600ohm.
>THD+N:
>SNR: 115dB.
>Weight: 0.55Kg.
>Size: 17*10*6cm.
xDuoo MT-604 is the latest tube hybrid headphone amplifier featuring four high-performance 6J1 tubes in the pre-amp stage and a transistor-based class A buffer providing whooping 2W of output power with a warm tube feel. MT-604 is a fully balanced headphone amplifier with balanced XLR/4.4mm input ports and 4-pin XLR/4.4mm headphone output ports.
Features:-
>Tube +Transistor Hybrid Amplifier.
>Four 6J1 Tubes for the Pre-amp stage.
>Class-A Transistor Buffer.
>XLR and 4.4mm Balanced Input/Output Options.
>High-performance audio circuitry.
>Independent Left & Right volume channels.
>Built-In Mute Circuit.
>Exquisite Build with Sand-Blasted Textured Panel.
>Gain: +15dB.
>Output Power: 2000mW @ 1kHz, 32ohm.
>Dynamic Range: 85dBA(32ohm).
>Frequency Response Range: 10Hz-60kHz.
>Supported Headphone Impedance: 16ohm-600ohm.
>THD+N:
>SNR: 115dB.
>Weight: 0.55Kg.
>Size: 17*10*6cm.
xDuoo MT-604 is the latest tube hybrid headphone amplifier featuring four high-performance 6J1 tubes in the pre-amp stage and a transistor-based class A buffer providing whooping 2W of output power with a warm tube feel. MT-604 is a fully balanced headphone amplifier with balanced XLR/4.4mm input ports and 4-pin XLR/4.4mm headphone output ports.
Questions & Answers
Have a Question?
-
Hi, can I use it as a tube buffer / preamp between topping e50 and topping pa5?
Yes, you can use a Tube buffer in between a DAC and Power Amplifier.
Questions & Answers
Have a Question?
-
Hi, can I use it as a tube buffer / preamp between topping e50 and topping pa5?
Yes, you can use a Tube buffer in between a DAC and Power Amplifier.