Go toLog in Go toSign up
Skip to content
Topping E50 ES9068AS MQA DAC: An Upgrade To Highly Acclaimed Topping E30

Topping E50 ES9068AS MQA DAC: An Upgrade To Highly Acclaimed Topping E30

Topping has introduced its latest Desktop DAC in the famous “E” series, the latest Topping E50. It comes as a direct upgrade to the highly-acclaimed Topping E30 DAC system with improvements in every department starting with its core DAC chipset. The latest E50 is equipped with ES9068AS Sabre DAC that provides high-quality audio signal decoding achieving ultra-low distortion and high SNR ratings, ensuring high-quality sound output for its users. Topping E50 also brings support for MQA decoding along with 32-bit/768kHz PCM and native DSD512 decoding support. It supports selectable USB+Coaxial+Optical input modes and RCA+TRS output options. Topping E50 is available for just 269$, check out more details here.
You could also purchase it on HiFiGo's Amazon Store:
America Amazon:

Topping E50-1


>High-Performance ES9068AS Sabre DAC chipset.

>Latest Generation XMOS XU216 16-core USB receiver.

>PCM decoding up to 32-Bit/768kHz.

>Native DSD512 decoding.

>CPLD processing.

>THD+N: 0.00009%.

>Full MQA decoding support.

>Ultra-low noise pre-amp output.

>Selectable RCA & TRS output modes.

>Remote Control.

>Automatic On/Off.

High-Performance Sabre DAC Chipset:-

Topping E50 adopts a high-performance ES9068AS ESS Sabre DAC Chipset that provides excellent high-resolution audio signal decoding with ultra-low distortion and high SNR ratings. The DAC is tuned to deliver a pure, natural, transparent sound decoding.

Topping E50-2

Latest-Generation XMOS USB Receiver:-

Topping E50 is equipped with the latest-generation 16-core XMOS USB signal receiver chip, the XMOS XU216. It provides support for high-resolution PCM 32-Bit/768kHz and native DSD512 decoding support over a USB connection. It also supports full MQA decoding with a USB connection. Users need to install ASIO drivers by Topping to get the full potential performance with the E50.

Ultra-Low Jitter Using CPLD Processing:-

Topping E50 uses CPLD processing to process the clock and optimize the digital signal achieving incredible jitter suppression capabilities. With this new CPLD processing, there is no need for an extra femtosecond crystal or an external clock to reduce the jitter.

Topping E50-3

Automatic On/Off Functionality:-

Topping E50 supports an automatic on/off function, it automatically turns on and is set to the input where a valid signal is found. When no signal is provided for about a minute, the E50 turns off automatically.

Topping E50-4

Professional TRS Balanced Cable Range Available With HiFiGo:-

In order to get the best performance out of your Topping E50+L50 Desktop Balanced Stack, we recommend you use high-quality TRS balanced connection cables. HiFiGo also has multiple offerings for high-quality TRS connector cables that you can use to create a fully balanced Desktop Stack. We have Monster M1000I 6.5mm Balanced cable to 6.35mm three-core stereo cable, Canare 6.5mm to 6.35mm three-core stereo cable, and generic TRS dual-channel balanced power amplifier cable. All three of these are available in different lengths starting at around 1m up to 20-30m. These are high-quality cables made to deliver a loss-free signal transmission between the DAC & AMP. Check these out on our store.

Price & Availability:-

Topping E50 is priced at 269$. It is available to purchase from our store, check out more details here.

As with all our orders, we offer free express worldwide shipping on orders above 500$. We also offer free priority shipping for selected regions for orders above 100$ check out more details on our shipping policy here.

Technical Specs:-

USB In:-


DSD: DSD64-DSD512(natively), DSD64-DSD256(DoP).

Full MQA decoding.

Coax/Opt In:-


DSD: DSD64(DoP).

MQA renderer decoding.

Decoding Parameters:-

Single-Ended RCA Output:-

THD+N(A-weighted): <0.00010%.

THD(no-weight): <0.0003%.

SNR: 124dB.

Dynamic Range: 124dB.

Frequency Response: 20Hz-20kHz(±0.1dB), 20Hz-40kHz(±0.03dB).

Output level: 2Vrms.

Noise(A-wt): <1.3uVrms.

Crosstalk: -130dB.

Channel Balance: 0.3dB.

Output Impedance: 20Ω.

TRS Balanced Output:-

THD+N(A-weighted): <0.00009%.

THD(no-weight): <0.0003%.

SNR: 126dB.

Dynamic Range: 126dB.

Frequency Response: 20Hz-20kHz(±0.1dB), 20Hz-40kHz(±0.03dB).

Output level: 4Vrms.

Noise(A-wt): <2.3uVrms.

Crosstalk: -139dB.

Channel Balance: 0.3dB.

Output Impedance: 100Ω.

Previous article Topping D90 III Sabre ESS9039SPro Bluetooth V5.1 Flagship Desktop DAC

Leave a comment

Comments must be approved before appearing

* Required fields