Tin HiFi P1 Max: Four Upgrades With P1 MAX
Tin HiFi isn’t bound to any introduction in the HiFi audio industry. Since its beginning, they have delivered high-performing In-Ear monitors in the industry. Among their successful IEMs, is their famous “P” series of Planar magnetic driver IEMs. The series has seen three models so far, the P1, the P1 Plus, and the P2. All three of these have received positive feedback from audio lovers all around the globe. Today, Tin HiFi has released another new Planar Magnetic IEM, the Tin HiFi P1 Max.
With years of experience in designing the Planar Magnetic Driver IEMs, Tin HiFi has designed the latest P1 Max with a new 14.2mm planar magnetic driver that adopts an ultra-thin lightweight aluminum diaphragm. The P1 Max is said to be easier to drive in comparison to the P1 and P2 models that required high amounts of power to sound their best. The P1 Max features a unique acoustic structure that promises outstanding sound quality with a designer look. P1 Max is launched officially for 179$, currently, it is available at a discounted pre-order price of 169$, check out more details here.
>14.2mm Planar Magnetic Drivers.
>Redesigned Acoustic Cavity Structure.
>All new designer looks with 3D printed cavity and Stainless Steel face-covers.
>Ultra-thin(2-Micron) Aluminum diaphragm.
>Easy to drive.
>Excellent sound clarity with fast response.
>Wide frequency response range.
>High-Purity monocrystalline copper cable.
>Lightweight and Comfortable.
>Frequency response range: 10Hz-20kHz.
>Rated Power: 5mW.
>Max Power: 10mW.
>Max distortion: 3%@1kHz.
>2.5mm balanced gold-plated termination plug.
Redesigned Planar Magnetic Driver For Easy Drivability:-
The primary upgrade with the P1 Max over the standard P1 model is its easy drivability. This is achieved by a redesigned driver architecture. Tin HiFi P1 Max adopts a newly developed 14.2mm planar magnetic driver with a new lightweight Aluminum diaphragm. The new Aluminum diaphragm is ultra-thin with just 2 microns of thickness. It uses powerful N52 neodymium magnets for a powerful magnetic flux. This new planar driver is very easy to power with a low impedance rating of just 16Ω and the sensitivity is also at a fairly normal level at 98dB.
Unique New Acoustic Structure:-
Tin HiFi has got years of experience in designing planar magnetic earphones. The latest P1 Max has got newly designed acoustic structure that allows it to achieve a wide sound stage, clear instrument details, better body throughout the frequency range, and a lively yet smooth treble section. P1 Max delivers a smooth and detailed sound that complements most genres of music well.
All-New Looks With 3D Printed Cavity & Designer Face Plates:-
The previous models from Tin HiFi in the P series of planar magnetic earphones had metallic shells. They were slightly on the heavier side too. The latest P1 Max has got 3D printed Resin inner cavity along with stainless steel torch array wire 3D drawing face covers. The pair weighs only 4.8 grams, and with an ergonomic shape, they are extremely comfortable to wear.
High-Purity Single Crystal Copper Wires:-
Tin HiFi P1 Max uses high-purity single crystal copper wire with a 108 core configuration. The cable has a smooth and warm sound signal transmission. It adopts 2-pin gold-plated connectors and a balanced 2.5mm gold-plated termination plug.
Price & Availability:-
Tin HiFi P1 Max is launched officially for 179$, available worldwide. The pair is currently available for pre-order at a discounted price of 169$. You can order one with us from our online website here. Shipments will begin by the end of this month, following the order number sequence.
1) 【Express】 FREE shipping on $500+ worldwide,
2) 【Premium】5-8 Days, FR/DE/UK/IT/ES/US, All tax and duties are prepaid by HiFiGo
3) 【Priority】 1-2 weeks, All tax and duty are prepaid by HiFiGo.
Europe 30 Countries, FREE shipping on $300+.
US/CA/JP/AU/KR/MY/TH/VN/SG/PH, FREE shipping on $100+.
Leave a comment