Go toLog in Go toSign up
Skip to content
FiiO K3 2021: Your Latest Desktop DAC+Headphone Amplifier

FiiO K3 2021: Your Latest Desktop DAC+Headphone Amplifier

Introducing the brand new K3 2021 Desktop USB DAC and Headphone Amplifier from FiiO. This is an upgrade over the highly successful K3 Desktop DAC/AMP that offered splendid performance at an affordable price. FiiO has revamped the famous device with a new high-quality XMOS USB signal chip, a new flagship-grade ESS DAC chip, dual crystal oscillators, and many more new updates to elevate your experience. FiiO K3 2021 still manages to keep the price in the affordable segment with a price tag of just 109.99$. Check out more details here.

FiiO K3 2021-1

Features:-

>Premium XMOS USB receiver.

>Supports 32-Bit/384kHz PCM and DSD256 decoding.

>Flagship-grade ES9038Q2M DAC Chip.

>High-Performance OPAMP.

>Dual USB modes.

>Coax+Optical Line out.

>Aux Line out.

>Uncompromised Power Supply With USB Type-C Connector.

>Two-level gain switch.

>Bass-Boost switch.

>Dual headphone output, 3.5mm SE+2.5mm Bal.

>ADC Volume Control.

>RGB indicator light.

Technical Parameters:-

>XMOS XU208 USB Chip.

>ES9038Q2M DAC.

>LPF: Ti OPA1612.

>AMP: OPA926x2.

>Max sampling rate: PCM 32-Bit/384kHz, DSD256(USB), PCM 32-Bit/192khz, DSD64(Coaxial), PCM 24-Bit/96kHz(Optical).

>Output Power: Up to 200mW Bal(32ohm), Up to 114mW PO(32ohm).

>SNR: 121dB PO and LO, 120dB Bal.

>Noise Floor: </=4uV PO, </=6uV Bal, </=3uV LO.

>Recommended Headphone Impedance: 16ohm-150ohm.

FiiO K3 2021-2

Powerful Signal Decoding:-

FiiO has featured a high-performance XMOS XU208 USB signal receiver chip in the K3 2021 that enables high-resolution PCM and DSD decoding support. K3 2021 supports PCM decoding up to 32-Bit/384kHz and DSD up to DSD256 over the USB connection. Elevate your PC’s audio department with the advanced USB decoding from K3 2021. It also has dual crystal oscillators ensuring quality performance.

Flagship-Grade Sabre DAC Chip:-

FiiO K3 2021 has taken a leap of upgrade from the former K3 model with a flagship-grade Sabre DAC chip. It utilizes an ES9038Q2M DAC chip that helps the device to get a great performance upgrade over the previous model. The previous model had SNR ratings of up to 114dB, the K3 2021 has an SNR rating of up to 121dB. Enjoy your music with great clarity, low distortion, and a clean, noise-free background with the K3 2021.

FiiO K3 2021-3

Upgraded USB Type-C Port For Easy Connectivity & Reliable Power:-

FiiO K3 2021 adopts the modern USB Type-C input for a reliable and stable connection. It also takes power with this port itself. FiiO has implemented over-voltage protection and a double-filter circuit to ensure a stable power supply. The K3 2021 supports both USB 1.0 and USB 2.0 modes selectable via a switch.

Two-Level Gain Switch & Bass Boost Switch:-

K3 2021 has a two-level gain switch and bass boost switch to enhance the sound experience for its users. The high gain mode shall be used for high impedance cans that benefit from higher output power.

FiiO K3 2021-4

ADC Volume Control For Easy Volume Adjustment:-

FiiO K3 2021 is equipped with an ADC volume control wheel on the front. It allows for fine, easy, and precise volume adjustment. It enables the users to use headphones/IEMs with different sensitivities with the K3 2021 without any trouble.

Price & Availability:-

FiiO K3 2021 is available for just 109.99$. Grab the K3 2021 today and unlock your way to high-resolution audio signal decoding with your PC/Smartphone/Laptops. Check out more details here.

Previous article Hidizs MP145: Brand-New Large 14.5mm Planar Magnetic Driver IEMs

Leave a comment

Comments must be approved before appearing

* Required fields